Cheap Eyeclops Night Vision Goggles

EyeClops Night Vision Goggles Review | Tuvie

Choosing a Night Vision Rifle Scope by Austin Cushing


Hunters, wildlife management officers, and game control agencies often use night vision rifle scopes and other night vision equipment to assist in deer hunting, varmint control, and other activities that are easier at night. The right night vision scope can make the difference between a perfect shot and the buck that got away.

Night vision systems are rated in terms of Generation, or Gen for short. There are three broad Generation levels, each signifying a significant leap in technological development over the previous generation of night vision equipment.

Generation 1

Generation 1 night vision equipment is designed to function under standard ambient light conditions (moonlight or starlight) or with sufficient IR illumination. It typically makes use of an S-20 photocathode with average photosensitivity of 180-200 A/lm coupled with electron acceleration to achieve gain. Generation 1 devices are known to suffer from geometric distortion (the fish-eye effect). Gen 1 image intensifiers have a duty cycle of approximately 1,500 hours of continuous operation.

Generations 2, 2+ and Super Gen

Generation 2 devices are prone to significantly less distortion than Gen 1 devices, and provide better-than-satisfactory performance under standard low-light levels. They usually rely on an extended-red S-25 photocathode (with minimum photosensitivity of 240 A/lm), plus a microchannel plate to achieve gain. European ‘Super Gen’ tubes represent the high end of Generation 2 night vision, achieving performance levels similar to early Gen 3 intensifier equipment. Gen 2 image intensifiers have a duty cycle of approximately 2,500 to 3,000 hours of continuous operation.

Generation 3

The most advanced level of night vision technology currently available, Gen 3 uses gallium-arsenide photocathodes with photosensitivity of more than 800 A/lm in the 450 to 950 nanometer (near infrared) region of the spectrum, with a microchannel plate for gain. An ion barrier film coats the microchannel plate, extending the life of the end product. Gen 3 night vision provides excellent performance even under extreme low light levels. Mil-spec versions of Generation 3 night vision equipment have practically no perceptible distortion, while even civilian equipment provides substantial advantages in clarity over its predecessors. A typical Generation 3 image intensifier has a duty cycle of approximately 10,000 hours of continuous operation.

Each generation of night vision equipment offers a significant improvement in functional range, expected lifespan, and image resolution over its predecessor. A top-of-the-line commercial Generation 3 rifle scope such as the Night Optics D-760-3A ( can withstand the recoil of heavy-caliber weapons while providing target recognition out to a quarter of a mile away, ensuring that even at night, you’ll be aiming at the right target.

With hunting season approaching, now is an excellent time to invest in a new night vision scope, high-visibility outdoor wear, hiking boots, and other survival and outdoor gear. If this article has inspired you, we encourage you to visit our website at for these and other tools. In addition to our listed brands, we have products from over 120 manufacturers to suit your needs on your next hunting trip – just call for quotes.

Original Source:

Military Night Vision Goggles For Military With Waterproof Body And Mounting Mechanism By Abigail Taylor on December 04, 2010 0

Military night vision goggles are used by the army, navy and air forces of different countries, today such equipment is also used by the application of many law enforcement and security personnel (fire).

However, people can also buy night vision goggles for personal use, but usually do not have the same specifications you will find the military versions. Because the military night vision goggles have become an expected part of modern warfare is that they allow the user to see the pictures in the dark, which may not only be seen with the naked eye. Also the military versions have a special feature where they can focus on the user sees the image of each eye separately, which means that they are able to maintain depth perception when viewing images at any time.

How night vision works:

Most of the night vision goggles consist of image intensifier tubes, a waterproof body and mounting mechanism. Work in the near infrared bands to detect environmental light of the reflection is seen. image intensifier tubes for night vision goggles then extended to a weak light, using the photoelectric effect. Tube, the photons of light in to a flap that opens up the number of electrons. These electrons are then amplified Surge more electrons. A powerful electric field to pull electrons toward the screen mesh phosphor bronze, which produces light point of electron impact. This allows the screen to phosphorus produces a bright image.

Military night-vision goggles are generally used as artificial light during the military operations, and fight night. This increases the safety of soldiers, much as they can move without detected by their instruments of enlightenment.

The military uses two main types of night vision goggles:

* Image Intensifiers
Image intensifiers work by expanding the ambient light (flashlight enemy, moonlight, starlight) so you can see, as you would in the day. But the problem is that when a very bright light source appears, your picture overwhelmed. Their advantages are low weight, price, size and detailed images they bring, but consumes little electricity.

* Infrared Lenses
Infrared lenses to convert the infrared spectrum of visible light, but retail prices, which is low. He also has difficulty distinguishing between two objects that have the same level of heat (which is a question of who is the enemy and who is a friend). In some cases, night vision goggles can use infrared to see through walls.

These particular military night vision goggles take any light immediately in the vicinity of where they are, and expanded to increase the image of thousands of times using an image amplifier. night vision goggles work of the photoelectric effect, which is due to photons collide with the indicator plate. When photons hit the metal, then produces electrons which are then supplemented by further causing more electrons can be produced that ignites the screen in front of the user eyes. In some cases, all the user needs to illuminate the entire field of vision is a star high in the sky. You will often see these devices used to report on wars and the image we often see on television, where they used to be green.

Original Source:

Cheap Eyeclops Night Vision Goggles News: EyeClops Night Vision Infrared Stealth Goggles: Toys …

EyeClops Night Vision goggles come equipped with a hinged, flip-up eye-piece that can be opened when the goggles are turned off, or closed when the goggles are in use.

Original Source:

EyeClops Night Vision Goggles

See where to buy EyeClops Night Vision Goggles online and where to get the best deal possible. Also, read customer EyeClops Night Vision reviews.

Original Source: EyeClops Night Vision Infrared Stealth Goggles: Toys …

EyeClops Night Vision goggles come equipped with a hinged, flip-up eye-piece that can be opened when the goggles are turned off, or closed when the goggles are in use.

Original Source:

EyeClops Night Vision Goggles

See where to buy EyeClops Night Vision Goggles online and where to get the best deal possible. Also, read customer EyeClops Night Vision reviews.

Original Source:

eyeclops nightvision | eBay – Electronics, Cars, Fashion …

Eyeclops Night Vision Goggles with battery pack works . Time left: .00. 17 bids. Newly listed Jakks Pacific Eye Clops Night Vision Binoculars. .00. Buy It Now.

Original Source:

EyeClops Night Vision Goggle Review and Test

im testing and reviewing EyeClops night vision goggles that i got for Christmas.. (.00)


Just wandering asked EyeClops Night Vision Infrared Stealth Goggles?

does this toy emit a light that other people can see? please help this will be a big factor on determining weather to buy. if it does I might as well by a flashlight for cheaper and I can see just as far.

here is what the toy looks like

And got the following answer:

Hi JW,
From their advert
invisible infrared illumination means you can see them, but they can’t see you

Have fun!

Prison Mike asked Whats the best night vision goggle to get?

I was thinking of something i wanna buy, and night vision goggles came to mind. I dont have the money to by a super expensive one, so something around $100 was what i had in mind. Those Eyeclops ones look cool, but they look somewhat cheap and amde for children. What would you recommend?

And got the following answer:

Hahaha those goggles are only with american special forces,costs for thousands!

Brad A asked Is there a way to make night vision goggles out of household appliances and other cheap electronics?

And got the following answer:

Nope that is he reason they cost 300+ bucks 🙂

If you want a lame IR toy $70

I would guess you could get this toy used for the same price as parts to build your own.

G S asked What is the closest to Military grade night vision goggles available to the public?

And got the following answer:

It all depends on how much you want to spend. You can get generation IV. Gen IV is gonna cost you just under $4,000.

There is a cheap real night vision alternative. The EyeClops Night Vision Goggles by Jakks. These are available at Target, Wal Mart and Mejier. They cost about $80 and they are the real deal. I have a pair and they work well. You can’t beat them for the price. They run on five double A batteries.

So what is the closest military grade night vision goggles you can purchase? Generation IV.